FRL Light Vehicle Brake Tester
The FRL brake tester for light vehicles is designed for light vehicles up to 3,500 kg of MMA, and to support loads of up to 4 Ton per axle to step. Its main task being to carry out a quick and effective verification of the operating status of the braking control in the vehicle, accurately measuring the maximum braking on the front and rear axles, handbrake, as well as the existing ovality on the braking system discs and drums.
The bench has independent motors to drive the rollers. It also incorporates security systems that detect the presence of the vehicle throughout the test and the loss of grip of the wheels at the time of measurement. The indication is independent on each wheel. A computer is in charge of controlling the entire measurement system and the operation of the machine. The control can be by keyboard, mouse or remote control and the visualization is carried out by means of a highly intuitive software.
Technical data
| Maximum axle load when passing | 4 Ton |
| Drive motors | 2 x 4.6 kW |
| Test speed | 5.7 km / h. |
| Maximum track width | 2,220 mm. |
| Minimum track width | 855 mm. |
| Voltage | 400 V. 50 Hz. Three-phase |
| Thermal protector | 2 x 12.5 A |
| Roller diameter | 202 mm. |
| Roller length | 685 mm. |
| Useful length of the rollers Welding / Synthetic fiber | 685 mm. |
| Distance between centers | 400 mm. |
| Adhesion coefficient | 0.9 dry - 0.7 wet |
| Measurement scale | 0 - 6 kN |
| Measure step | 10 N |
| Measurement indication error | one% |
